$schemamarkup = get_post_meta(get_the_ID(), 'schemamarkup', true); if(!empty($schemamarkup)) { echo $schemamarkup; }

How to Getting Started With XSane Scanning on Debian Wheezy 7 Linux Easy Guide

August 22, 2014 | By the+gnu+linux+evangelist.

Get Started Scanning on Debian Wheezy 7

Hi! The Tutorial shows you Step-by-Step How to Install and Getting-Started with Scanner for Debian Wheezy 7 GNU/Linux Desktop.

XSane is a graphical scanning frontend for SANE (Scanner Access Now Easy). It uses the SANE-library to talk to scanners. This means that XSane does not support any scanners itself. Take a look at the SANE-backends homepage to find out which scanners are supported by SANE.

The Way followed here is Practically Working and perhaps it miss of the ultimate Terminal Command to recognize the Device associated to the Scanner.

Getting-Started with XSane Scanning on Debian Wheezy 7 - Featured

  1. Open Terminal Window
    (Press “Enter” to Execute Commands)

    Getting-Started with XSane Scanning on Debian Wheezy 7 - Open Terminal

    In case first see: Terminal QuickStart Guide.

  2. How to Recognize Device Name Associated to Scanner.

    • Disconnect the Scanner
    • List All Connected Devices 
      ls /dev | grep '^s'
    • Power On & Connect the Scanner
    • List All Connected Devices Again 
      ls /dev | grep '^s'

    Then carefully Find the /dev/sXYZ entry that is Appearing in the Latest List.

  3. Make the proper Scanner Device Symlink.

    • For USB Scanners: 
      sudo su -c "ln -s /dev/sXYZ /dev/usbscanner"
    • For SCSI Scanners: 
      sudo su -c "ln -s /dev/sXYZ /dev/scanner"

  4. Install XSane for Debian.

    sudo su -c "apt-get install xsane sane"

  5. Launch XSane and Start Scanning :).

    xsane

    Getting-Started with XSane Scanning on Debian Wheezy 7 - XSane

  6. How to Install Printer Drivers for Debian

    Download and Install Linux Printer Drivers