$schemamarkup = get_post_meta(get_the_ID(), 'schemamarkup', true); if(!empty($schemamarkup)) { echo $schemamarkup; }

Install & Use XSane Scanner on Manjaro Get Started Guide

July 1, 2022 | By the+gnu+linux+evangelist.

Getting Started

  1. 3. Finding Scanner Device ID

    How to Recognize Device Name Associated to Scanner
    Follow the below Simple Procedure:

    • Disconnect the Scanner
    • List All Connected Devices 
      ls /dev | grep '^s'
    • Power On & Connect the Scanner
    • List All Connected Devices Again 
      ls /dev | grep '^s'

    Then carefully Find the /dev/sXYZ entry that is Appearing in the Latest List.

  2. 4. Symlinking Scanner

    Make the proper Scanner Device Symlink
    To create the Scanner Symlink:

    • For USB Scanners: 
      sudo su -c "ln -s /dev/sXYZ /dev/usbscanner"
    • For SCSI Scanners: 
      sudo su -c "ln -s /dev/sXYZ /dev/scanner"

  3. 5. Get Started Scanning

    Finally, Launch XSane and Start Scanning :)
    From Terminal with:

    xsane

    Or use the desktop Launcher:
    Step-by-step XSane Scanning Manjaro Get Started Guide - XSane

    How to Install Printer on Manjaro desktops

    Installing Printer on GNU/Linux

    4. So Now I’m truly Happy if My Guide could Help you to Get Started Scanning with XSane on Manjaro!

Contents


Pages: 1 2 3