How to Getting Started With XSane Scanning on Lubuntu 14.04 Trusty LTS Easy Guide

Get Started Scanning on Lubuntu 14.04 Trusty LTS

Hi! The Tutorial shows you Step-by-Step How to Install and Getting-Started with Scanner for Lubuntu 14.04 Trusty Tahr LTS GNU/Linux Desktop.

XSane is a graphical scanning frontend for SANE (Scanner Access Now Easy). It uses the SANE-library to talk to scanners. This means that XSane does not support any scanners itself. Take a look at the SANE-backends homepage to find out which scanners are supported by SANE.

The Way followed here is Practically Working and perhaps it miss of the ultimate Terminal Command to recognize the Device associated to the Scanner.

1. Open Terminal Window
   (Press “Enter” to Execute Commands).

   Ctrl+Alt+t
   

2. How to Recognize Device Name Associated to Scanner.

   • Disconnect the Scanner
   • List All Connected Devices

     ls /dev | grep '^s'

   • Power On & Connect the Scanner
   • List All Connected Devices Again

     ls /dev | grep '^s'

   Then carefully Find the /dev/sXYZ entry that is Appearing in the Latest List.

3. Make the proper Scanner Device Symlink.

   • For USB Scanners:

     sudo su -c "ln -s /dev/sXYZ /dev/usbscanner"

   • For SCSI Scanners:

     sudo su -c "ln -s /dev/sXYZ /dev/scanner"

4. Install XSane for Lubuntu Linux.

   sudo su -c "apt-get install xsane sane"

5. Launch XSane and Start Scanning :).

   xsane

   

6. How to Install Printer Drivers for Lubuntu Linux

   Download and Install Linux Printer Drivers

   Linux Printers Drivers