How to Add LinuxCNC Repository for Debian-Based Systems

GNU/Linux DebianCNC Repository Adding

Hi! The Tutorial shows you Step-by-Step How to Add LinuxCNC Repository in Debian-Based GNU/Linux OSes.

And LinuxCNC for Debian is a CNC Machines Controller.

So this Repo Setup is Valid for All the Debian-based Platforms like:

• Deepin
• MX Linux
• antiX
• Parrot
• Netrunner
• Voyager
• SparkyLinux
• MakuluLinux
• Elive
• LMDE
• Parsix

1. 1. Launching Terminal

   How to QuickStart with Command Line on Debian GNU/Linux:

   Console Debian QuickStart Guide

   Getting-Started with Command Line on Debian Linux

2. 2. Adding LinuxCNC GPG Key

   Again to Add LinuxCNC GPG Signature Key
   Do:

   sudo apt-key adv --keyserver hkp://keys.openpgp.org --recv-key 3cb9fd148f374fef

   Authenticate with the User’s Admin Pass.
   If Got “User is Not in Sudoers file” then see: How to Enable sudo.
   This Key may be Outdated… So eventually amend it, but the below Repo Setup don’t need it.

3. 3. Adding LinuxCNC Repo

   Then to Add LinuxCNC Repository for Debian
   For Debian Buster, MX 19, Deepin 20… Simply execute:

   echo deb [trusted=yes] http://linuxcnc.org/ buster base 2.8-rtpreempt | sudo tee -a /etc/apt/sources.list.d/linuxcnc.list

   Where for Debian Stretch:

   echo deb [trusted=yes] http://linuxcnc.org/ stretch base 2.7-uspace | sudo tee -a /etc/apt/sources.list.d/linuxcnc.list

   Next to Refresh Debian Apt Repo Sources
   Play:

   sudo apt update